Reamers Categories ::: Hand Reamers ::: Spiral Flute

Hand Reamers are used for final sizing of holes. The square on the end is suitable for holding in a tap wrench or vise. The cutting end is ground with a starting taper to provide easy entry. The helical reamer is preferred where there is an interruption to the cut, such as a keyway.

Packaging: All sizes are individually packaged.

Part No-- 445E108
1/8,Hand Reamer Spiral

Part No-- 445E110
5/32,Hand Reamer Spiral

Part No-- 445E112
3/16,Hand Reamer Spiral

Part No-- 445E114
7/32,Hand Reamer Spiral

Part No-- 445E116
1/4,Hand Reamer Spiral

Part No-- 445E118
9/32,Hand Reamer Spiral

Part No-- 445E120
5/16,Hand Reamer Spiral

Part No-- 445E122
11/32,Hand Reamer Spiral

Part No-- 445E124
3/8,Hand Reamer Spiral

Part No-- 445E126
13/32,Hand Reamer Spiral

Part No-- 445E128
7/16,Hand Reamer Spiral

Part No-- 445E130
15/32,Hand Reamer Spiral

Part No-- 445E132
1/2,Hand Reamer Spiral

Part No-- 445E134
17/32,Hand Reamer Spiral

Part No-- 445E136
9/16,Hand Reamer Spiral

Part No-- 445E138
19/32,Hand Reamer Spiral

Part No-- 445E140
5/8,Hand Reamer Spiral

Part No-- 445E142
21/32,Hand Reamer Spiral

Part No-- 445E144
11/16,Hand Reamer Spiral

Part No-- 445E146
23/32,Hand Reamer Spiral

Part No-- 445E148
3/4,Hand Reamer Spiral

Part No-- 445E150
25/32,Hand Reamer Spiral

Part No-- 445E152
13/16,Hand Reamer Spiral

Part No-- 445E154
27/32,Hand Reamer Spiral

Part No-- 445E156
7/8,Hand Reamer Spiral

Part No-- 445E158
29/32,Hand Reamer Spiral

Part No-- 445E160
15/16,Hand Reamer Spiral

Part No-- 445E162
31/32,Hand Reamer Spiral

Part No-- 445E164
1",Hand Reamer Spiral

Part No-- 445E204
1-1/16,Hand Reamer Spiral

Part No-- 445E208
1-1/8,Hand Reamer Spiral

Part No-- 445E212
1-3/16,Hand Reamer Spiral

Part No-- 445E216
1-1/4,Hand Reamer Spiral

Part No-- 445E220
1-5/16,Hand Reamer Spiral

Part No-- 445E224
1-3/8,Hand Reamer Spiral

Part No-- 445E228
1-7/16,Hand Reamer Spiral

Part No-- 445E232
1-1/2,Hand Reamer Spiral