Specialty Drill Bits : Bell Hangers Drills

SPECIALTY BITS > PIP 780
780 BELL HANGER DRILLS
AVAILABLE IN 12", 18" 24" & 30" OVERALL LENGTH

SIZE	SHANK SIZE	MM	PART NUMBER	UPC NO. 722170
3/16" x 12"	3/16" rnd	5	780.12.0316	78030
1/4" x 12"	1/4" rnd	6	780.12.0416	78001
5/16" x 12"	5/16" rnd	8	780.12.0516	78002
3/8" x 12"	3/8" rnd	10	780.12.0616	78003
7/16" x 12"	7/16" rnd	11	780.12.0716	78015
1/2" x 12"	1/2" rnd	13	780.12.0816	78016
9/16" x 12"	9/16" rnd	14	780.12.0916	78017
5/8" x 12"	5/8" rnd	16	780.12.1016	78018
11/16" x 12"	11/16" rnd	17	780.12.1116	78019
3/4" x 12"	3/4" rnd	19	780.12.1216	78020

3/16" x 18"	3/16" rnd	5	780.18.0316	78004
1/4" x 18"	1/4" rnd	6	780.18.0416	78005
5/16" x 18"	5/16" rnd	8	780.18.0516	78006
3/8" x 18"	3/8" rnd	10	780.18.0616	78007
7/16" x 18"	7/16" rnd	11	780.18.0716	78021
1/2" x 18"	1/2" rnd	13	780.18.0816	78008
9/16" x 18"	9/16" rnd	14	780.18.0916	78022
5/8" x 18"	5/8" rnd	16	780.18.1016	78023
11/16" x 18"	11/16" rnd	17	780.18.1116	78024
3/4" x 18"	3/4" rnd	19	780.18.1216	78025
13/16" x 18"	13/16" rnd	21	780.18.1316	78026
7/8" x 18"	7/8" rnd	22	780.18.1416	78027
15/16" x 18"	15/16" rnd	24	780.18.1516	78028
1" x 18"	1" rnd	25	780.18.1616	78029

1/4" x 24"	1/4" rnd	6	780.24.0416	78009
5/16" x 24"	5/16" rnd	8	780.24.0516	78010
3/8" x 24"	3/8" rnd	10	780.24.0616	78011
1/2" x 24"	1/2" rnd	13	780.24.0816	78012

1/4" x 30"	1/4" rnd	6	780.30.0416	78013
3/8" x 30"	3/8" rnd	10	780.30.0616	78014

	High carbon steel
	Fish eye hole for pulling wire
	Packaged / Bulk program available

High carbon steel drills for boring wood and fishing wires. Fish eye hole provided near tip of flutes to aid pulling wire after completion of drilling.

Two recesses in shank to allow for extension set screws (bits 5/8" and over).